Fournisseurs de haute qualité Buveur de mamelon, Abreuvoir à tétine pour volaille, Abreuvoir à tétine pour poulets en Chine

Accueil > Liste de Produits > Système d'abreuvement > Le poitrail d'eau de poulet en plastique automatique le plus populaire pour la ferme de poulet

Le poitrail d'eau de poulet en plastique automatique le plus populaire pour la ferme de poulet

Informations de base

Modèle: HXD-04

Description du produit

Spécifications mamelon d'eau de poule
1.Acier inoxydable
2.Résistance à la corrosion
3.Sauvoir de l'eau
4. Temps d'utilisation prolongé

Le poitrail d'eau de poulet en plastique automatique le plus populaire pour la ferme de poulet
Item Spring nipple drinker Steel-ball nipple drinker Steel-ball nipple drinker with drop cup
Colour Yellow/White/Orange/Red
Weight 20g/piece 20g/piece 21g/piece
  1.Stainless Steel Made
2.Never get rusty
3.Never leak, Saving water
4.Water falling smoothly
5.Nipple will not be blocked up
6.Easy to install and dismantle
7.No maintian cost
8.Long usage time
9.High strenght, corrosion resistance
Introduction
 
 
Usages Great for broilers,layers,chicks,ducks and other game birds
Advantages 1.Clean water---direct drinking for Chicken from nipple drinker,No spiling and soaking, like the original container style drinker, to make sure chicken can get clean,freshwater,which can avoid some bird diseases.
2.Save labor---connect with PVC pipe or water container,do not need to check the water condition very often,just need to make sure PVC pipe connect with water or the water container have water.
3.Easy for Chicken to use it---Bright red/yellow/orange design, attract to birds or chicken and the nipple drinker dispense a drip of water whenever they are pecked,they can avoid some birds diseases for chicken with playing.
4.Easy to clean for nipple,bacause of removable parts.
 
Specification 1.Specification:Flux:30-50ml/min for egg chicken, 80-100ml/min for meat chicken
2.Material:ABS Plastic, Stainless steel
3.Automatic,ball valve 360 nipple drinker
4.Convenient and Durable
Instruction 1.Make a hole using 11/12"drill bit at the bottom of PVC, bucket or other containers you find available
2.For use on this plastic re-used water bottle cap,5/16"drill bit may be appropriate
3.Wind some thread tape and then screw the nipple intothe hole
4.1 nipple for 2-3 birds
5.Water nipple drinker only work under low pressure(5.5psi or less) Do not connect directly to a garden hose(house water pressure is around 30 to 75 psi) If you want to have it connected directly to a garden hose then a water pressure regulator is required.Total lenght:about 5.6cm/2.24"














Groupes de Produits : Système d'abreuvement